china valve Global hotline: 86-577-67926789      Email:valveoem@gmail.com            ZHEJIANG SEDELON VALVE CO.,LTD.

china valve
Contact US
  TEL: 86-577-67926789
  TEL: 86-577-67927788
  FAX: 86-577-67927789
  Email: valveoem@gmail.com
  Email: sales@asia-valve.com
Valve Series
Cast Steel Valve
Forged Steel Valve
Gate valve
Globe valve
Check valve
Ball valve
Butterfly valve
Plug valve
Other valve
Recommendation
Cast Steel trunnion mounted Ball Valve
Cast steel Floating Ball Valve
Forged Steed Floating-Ball Valve
Forged Steel trunnion mounted Ball Valve
Cast Steel Gate Valve
Cast Steel Globe Valve
Forged Steel Gate Valve
Forged Steel Globe Valve
Pressure Seal Gate Valve
Pressure Seal Globe Valve
JIS Gate valve
DIN3352 Gate Valve
Cryogenic Gate Valve
Cast Steel Swing Check Valve
Three Offset Butterfly Valve
Homepage>>>Products>>>Globe Valve>>>Duplex stainless steel globe valve - Alloy Steel globe valve

DUPLEX STAINLESS STEEL | SPECIAL ALLOY GLOBE VALVES


Size Range: DN15 - DN600 / 1/2" - 24"
Design Standards: MSS-SP80 / BS5154/BS1873 /ASME B16.34
Pressure Ratings: Class 150LB, Class 300LB,CLASS600LB Class900,class1500, PN10~PN250
End Connections: Flanged ASME B16.5, EN1092-1 (Flat Face FF or Raised Face flange (RF) , RING TYPE JOINT FLANGE(RTJ))
Face to Face: ASME B16.10 ,ASME B16.47 , EN558-1
Globe valve Type Through way type , Y type Globe valve, and Angle Type globe valve, OS&Y, Rising Stem .
DISC Plug type disc, regulating disc(throttling disc) ,regular disc,
Seat Integral Seat , Optional Extras Renewable Seats 2"/ DN50 and above
Operated type :Hand wheel , Gear Operated, Pneumatic Operated, Electric Operated, Impact Hand wheel Operated
Pressure Testing: API 598 or BS EN 12266-1:2003,DIN3230
Optional Extras: Locking Devices
Open and Close Indicator
Bare stem with ISO5210 top mounting pad for actuator etc.

Stainless Steel Globe valves :
A351 CF8(F304),CF8M(F316),CF3(F304L),CF3M(F316L),CF8C(F347),F321,F321H,CK20

Alloy Steel Globe valves :
Monel 400, monel k500, alloy20,904L,CN7M, Inconel, Hastelloy® B&C

Duplex Stainless Steel Globe valves:
A351 CN7M(B473), CD4MCu(F50),CK3MCuN(F44),CG8M,A890-1A,4A,5A,6A, A182 F44,F50,F51,F53,F310

Bronze Globe valves , Nickel aluminum bronze(NAB) Globe valves , Gunmeta Globe valves:
B148 C95500,C95800,C95400,B62, C83600,B61,B62 C92200, B150 C63200

DIN Stainless Stee Globe valves: 1.4408, 1.4308

alloy-globe-valve-Duplex-stainless-steel-globe-valvealloy-globe-valve-Duplex-stainless-steel-globe-valve

alloy-globe-valve-Duplex-stainless-steel-globe-valvealloy-globe-valve-Duplex-stainless-steel-globe-valvealloy-globe-valve-Duplex-stainless-steel-globe-valve


Duplex stainless steel globe valve - Alloy Steel globe valves manufacturer & supplier: SEDELON VALVE CO.,LTD.

Nickel Alloy / Monel®Globe valve

Monels® are a Nickel alloy material with addition of:

  • Copper (Cu)
  • Silicon (Si)
  • Manganese
  • These materials are also known as Monel, Alloy 400 and Alloy K500

    Common Material Specifications

    Ni Cu30 Fe3.5 Si1.5(+) (Monel 400)
  • A494 M-35-1 (UNS N24135) (Low Si –weldable)
  • A494 M-35-2 (UNS N04020)
  • BS3071: NA1
  • BS3071: NA3
  • OTHERS

  • Wrought equivalent Alloy 400 (UNS N04400)
  • Typical Properties

  • Tensile 430 N/mm2
  • Yield 170-205 N/mm2
  • Elongation 20-25%
  • Hardness HB 100-150
  • Density 8.8 g/cm3
  • Pressure temperature rating: B16.34 Group 3.4 15.9 bar class 150
  • Corrosion Properties

  • Good general corrosion for seawater service
  • Especially good for higher flow rates
  • Excellent trim material for NAB, gains cathodic protection with many alloys.
  • Not recommended for low velocities
  • Additional Uses & Comments

  • Variety of wrought/ bar specifications available, good for trim material. Excellent strength from K500
  • Used for oxygen service
  • Reasonable castabilty with suitable design and higher Si content
  • Weldable with lower Si content
  • Excellent for hydrofluoric & other acids (not nitric)
  • Cautions

  • Ease of manufacture: trade-off between castability and weldability
  • Pitting can be a problem at low velocities
  • Don’t use as trim for austenitic stainless
  • P/T rating class 300=600 psi CWP
  • Cost effectiveness need consideration


  • Alloy 20 / 904L GLOBE VALVES

    Alloy 20 & 904L are special Stainless (Austenitic) :

        Al20
    904L
    Chrome
    (Cr) 20%
    20%
    Nickel (Ni) 25%
    29%
    Molybdenum (Mo) 2% 4.5%
    Copper
    (Cu) 
    3% 1.5%
    Columbium
    (Cb) trace
    -
    (=Niobium,Nb)      

    These materials are also known as:

  • Alloy 20:UNS N08020, CN7M (N08007), URANUS B6M similar
  • 904L: UNS N08904, URANUS B6
  • Typical Properties

  • Tensile 425 min N/mm2
  • Yield 170 min N/mm2
  • Elongation 35%
  • Hardness
  • Density   
  • Corrosion Properties

  • Good for seawater service
  • Especially good for:
  • General corrosion
  • Erosion /corrosion
  • Stress corrosion cracking
  • Corrosion fatigue
  • Occasional pitting will occur
  • Poor fouling resistance
  • Additional Uses & Comments

  • Good for sulphuric acid + wide range of acids
  • Extra conditions re: NACE MR0175 (AOD must be used, restrictions on chemical analysis) 22HRC max
  • Insulate from Copper piping


  • Duplex Stainless Steel GLOBE VALVES

    Duplex Stainless Steels are;

    Duplex (Austenitic-Ferritic) or 22% Chrome St/St, also with

  • Nickel (Ni) 5%
  • Molybdenum (Mo) 3%
  • Sometimes Copper (Cu) 1%
  • Fe Cr22 Ni5 Mo3

  • UNS J92205
  • Also known as:

  • UNS S31803, SAF2205, Alloy 2205, DIN 1.4462
  • 4A (ASTM 891)
  • Typical Properties

  • Tensile 620 min N/mm2
  • Yield 415 min N/mm2
  • Elongation 20%
  • Hardness 185 HB typ
  • Density 7.8 g/cm3
  • P/T ratings, typically B16.34 group 2.8 =20 bar class 150 (UNS S32570)
  • Corrosion Properties

  • Good for seawater service
  • Especially good for:
  • General corrosion
  • Erosion /corrosion
  • Stress corrosion cracking
  • Corrosion fatigue
  •  



    Super Duplex Stainless Steels GLOBE VALVES

    Super Duplex Stainless Steels are improved Duplex (Austenitic-Ferritic) St/St, typically:

  • Chrome (Cr) 25%
  • Nickel (Ni) 7%
  • Molybdenum (Mo) 3%
  • Sometimes Copper (Cu) 1% or Tungsten (W) 1%
  • Also known as:

  • Zeron 100 (UNS 32760), SAF 2507 UNS S32570, UNS J93380 (Cast Zeron
  • Other similar materials

  • UNS S32550 (Ferralium 255)
  • Cr26 Ni5 Mo3.5 Cu2 N
  • CD-4MCu
  • Cr25.5 Ni5.5 Mo2 Cu3 N
  • Several under brand names
  • Typical Properties

  • Tensile 700 min N/mm2
  • Yield 450 min N/mm2
  • Elongation 25%
  • Hardness 180-200 HB typ
  • Density 7.8 g/cm3
  • Corrosion Properties

  • Good for seawater service
  • Especially good for:
  • General corrosion
  • Erosion /corrosion
  • Chloride and Sulphide Stress corrosion cracking
  • NACE <HRC34
  • Corrosion fatigue
  • Poor fouling resistance
  • Additional Uses & Comments

  • Very high strength
  • Good high temperature rating but limited to 400 oC
  • P/T class 300=750 psi CWP


  • Inconel® /Incoloy® GLOBE VALVES

    Inconel® are Nickel-Chrome-Iron Alloy’s and Incoloy® are Nickel-Crome-Molybdenum Alloy’s,

    Nickel alloy:
      825
    625
    Iron (Fe) 31%
    5%
    Chrome (Cr)
    20%
    21%
    Nickel
    (Ni)
    42%
    62%
    Molybdenum (Mo) 2%
    9%
    Copper (Cu) 2% 1.5%
    Columbium+Ta (Cb)
    trace
    3.7%

    These alloys are also known as:

  • Incoloy® 825: UNS N08825, similar to CU5MCuC
  • Inconel® 625: UNS N06625,CW-6M, CW-6MC, UNS N26625
  • Typical Properties

  • Tensile 520 495 min N/mm2
  • Yield 240 275 min N/mm2
  • Elongation 20% 25%
  • Density 8.1 -8.4 g/cm3
  • P/T rating sim. to B16.34 group 3.8 20 bar class 150
  • Corrosion Properties

  • 825 Good
  • 625 Outstanding
  • Corrosion fatigue, crevice corrosion
  • Both poor re:fouling
  • Additional Uses & Comments

  • Alloy 825
  • specially resistant to sulphuric and phosphoric acids
  • Alloy 625
  • good strength without relying on heat treatment
  • particularly good crevice corrosion resistance
  • outstanding combination of corrosion fatigue and crevice corrosion resistance
  • NACE MR01-75 35 HRC max acceptable
  • Haynes comment “generally superseded by the more capable Hastelloy® grades”
  •  



    Hastelloy® B&C GLOBE VALVES

    Hastelloy® B is a Nickel-molybdenum alloy and Hastelloy® C is a Nickel-chrome-molybdenum alloy.

  • Haynes Stellite alloys
  • Collection of Nickel alloys
  • B: B-2, B-3
  • C: C-22, C-276, C-2000
  • D,G,N,W & X
  • Cast grades
  • B2= N-7M (UNS N30007) sim. to N10665
  • C22=CX-2MW (UNS N26022) sim. To N06022
  • Material Specifications

  • B2= N-7M (UNS N30007)    
  • Ni69% (bal), Mo 28%, Fe2%,Cr1%
  • C22=CX2MW (UNS N26022)
  • Ni56%(bal), Cr22%,Mo13%,Fe3%,Nb3%
  • Typical Properties

      B2 C22
    Tensile
    525 550 min N/mm2
    Yield 275
    240 min N/mm2
    Elongation 20%
    30%
    Density
    8.1 8.7 g/cm3
    P/T rating Similar to B16.34 group 3.7 or 3.8 (20 bar for class 150)    

    Corrosion Properties

  • B2    Good
  • C22    Outstanding
  • Corrosion fatigue, crevice corrosion
  • Both poor re:fouling
  • Additional Uses & Comments

  • Resistant to a wide range of acids, often at high temperatures
    Not generally known for seawater use
    Acceptable to NACE
  • Page keywords: duplex stainless steel GLOBE VALE,stainless GLOBE VALVE,alloy globe valves,Monel Globe valve,Alloy 20/904L GLOBE VALVES,Duplex Stainless Steel GLOBE VALVES,Inconel GLOBE VALVES,Hastelloy GLOBE VALVES, special alloy globe valves, stainless steel globe valve Manufacturer & supplier

    COPYRIGHT(C) 2008 Sedelon. ALL RIGHTS RESERVED.www.asia-valve.com
    Home  |  About Us   |  Products  |  Service  |  Certificates  |  Contact us  |  Enquiry
    Global hotline:86-577-67927788   Email:valveoem@gmail.com   Sedelon Valve Co.,Ltd.